30
MAR
2022
MAR
2022
0
Share
Solid Oak Parquet flooring, installed at Arley House, nr Bewdley
230mm x 70mm x 22mm Solid Oak Parquet Flooring was installed at Arley House near Bewdley. The existing sub-floors required additional preparation work, which included self-levelling latex and an epoxy DPM.
The solid oak parquet was installed in herringbone pattern and then sanded and sealed with Bona Prime Classic and Bona Traffic HD floor lacquer
Continue Reading →
22
FEB
2018
Share
FEB
2018
New Basketweave Parquet Floor
Brother Patrick asked us to install Basketweave Parquet flooring at The Oratory of St Philip Neri in Edgbaston, Birmingham. The existing sub-floor was covered with plywood to ensure it was level. 280 x 70 x 22mm solid oak parquet from Brooks Bros Ltd were installed using a silane adhesive directly to the ply-wood sub-floor. The parquet flooring was then sanded and resealed using Bona Classic Prime and Bona Traffic HD lacquer
Continue Reading →
15
NOV
2017
Share
NOV
2017
Existing oak floor restoration at the City of Birmingham Orchestra. The oak floor needed to be restored including a couple of repairs due to damage to existing oak flooring, the work was to include 2 studios. These needed to be completed first to allow for use later in the week, with the main hall to be completed last.
The main hall had some repairs to be undertaken to the oak floor before finally it could be sanded back to bare and ...
Continue Reading →
14
AUG
2017
Share
AUG
2017
The existing floor was removed and an epoxy damp proof membrane was then applied prior to the parquet flooring being installed. The blocks were then installed using a laser guide to ensure the straightness of the installation. Once the flooring was installed along with a two block border, the floor was then sanded and finished with one base coat of Bona Prime Classic and two top coats of Bona Mega water based floor lacquer.
18
MAY
2015
Share
MAY
2015
Herringbone Floor Restoration Eaton Square, London
The floor required a number of repairs to the existing herringbone floor due to loose blocks and damage caused during the ongoing modernisation works taking place. The loose blocks were carefully lifted out and the floor beneath them checked to remove any loose debris or previous adhesive before they were then re-fixed back into place using Bona adhesive. The floor was then fully sanded to remove the previous finish
Fiddes Shellac Sealer was applied to the parquet ...
Continue Reading →
17
MAY
2015
Share
MAY
2015