Posts Tagged 'Parquet floor'

Oak Floor Sanding & Resealing – Lichfield, Staffordshire

Oak floor sanding & resealing in Lichfield, Staffordshire.

An existing oak parquet floor was in need of a sand and reseal to bring the floor back to looking almost as good as new.  The floor was sanded to remove the existing surface finish, we then applied a medium oak wood stain to the floor.  Once the medium oak wood stain was dry, the floor was finished using Bona Prime and 2 coats of Bona Mega floor lacquer

Continue Reading →
0

Rustic Parquet Floor, Whitacre Heath

Rustic 280mm Parquet Block Floor

A stunning parquet floor was installed using rustic 280mm solid oak blocks. These were fitted in a double herringbone pattern.

Sub-floor preparation was required involving the supply and installation both a plywood sub-floor and self levelling latex and DPM.

Also a floor fitted electric point was installed and covered with a removable lid to enable easy access.

The floor was then sanded to a fine finish and coated with one base coat and 2 top coats of Bona Mega ...

Continue Reading →
0

Oratory of St. Philip Neri, Edgbaston, Birmingham

New Basketweave Parquet Floor

Brother Patrick asked us to install Basketweave Parquet flooring at The Oratory of St Philip Neri in Edgbaston, Birmingham.  The existing sub-floor was covered with plywood to ensure it was level. 280 x 70 x 22mm solid oak parquet from Brooks Bros Ltd were installed using a silane adhesive directly to the ply-wood sub-floor.  The parquet flooring was then sanded and resealed using Bona Classic Prime and Bona Traffic HD lacquer

 

 

Continue Reading →
0

Eaton Square, London

Herringbone Floor Restoration Eaton Square, London

The floor required a number of repairs to the existing herringbone floor due to loose blocks and damage caused during the ongoing modernisation works taking place.  The loose blocks were carefully lifted out and the floor beneath them checked to remove any loose debris or previous adhesive before they were then re-fixed back into place using Bona adhesive.  The floor was then fully sanded to remove the previous finish

Fiddes Shellac Sealer was applied to the parquet ...

Continue Reading →
0