230mm x 70mm x 22mm Solid Oak Parquet Flooring was installed at Arley House near Bewdley. The existing sub-floors required additional preparation work, which included self-levelling latex and an epoxy DPM.
The solid oak parquet was installed in herringbone pattern and then sanded and sealed with Bona Prime Classic and Bona Traffic HD floor lacquer
Continue Reading →
Existing oak floor restoration at the City of Birmingham Orchestra. The oak floor needed to be restored including a couple of repairs due to damage to existing oak flooring, the work was to include 2 studios. These needed to be completed first to allow for use later in the week, with the main hall to be completed last.
The main hall had some repairs to be undertaken to the oak floor before finally it could be sanded back to bare and ...Continue Reading →
Father Michael asked us to repair the existing parquet block floor at St John’s Church in Tmworth as alterations were being made and the floor needed to be extended where wwalls were being moved and replaced. Reclaimed blocks were sourced by Father Michael to match the existing blocks.
We needed to do a lot of floor preparation work before the blocks could be installed due to the unevenness of the existing floor along holes or damaged areas within the floor. Once ...Continue Reading →
CMT Flooring were asked to install new solid oak parquet flooring. The solid oak parquet flooring was fully bonded to the existing screed subfloor using a silane flexible adhesive. The wood flooring was then sanded and then sealed with Bona Mega floor lacquer.Continue Reading →
Sand and reseal of existing parquet herringbone block flooring at a school in Edgbaston. The existing floor was sanded back to bear wood to remove the existing finish. It was then sanded to a fine finish before it was sealed with 1 base coat of Bona Prime Classic and 3 coats of Bona Traffic HD floor lacquer.