Oak floor sanding & resealing in Lichfield, Staffordshire.
An existing oak parquet floor was in need of a sand and reseal to bring the floor back to looking almost as good as new. The floor was sanded to remove the existing surface finish, we then applied a medium oak wood stain to the floor. Once the medium oak wood stain was dry, the floor was finished using Bona Prime and 2 coats of Bona Mega floor lacquer
Continue Reading →
230mm x 70mm x 22mm Solid Oak Parquet Flooring was installed at Arley House near Bewdley. The existing sub-floors required additional preparation work, which included self-levelling latex and an epoxy DPM.
The solid oak parquet was installed in herringbone pattern and then sanded and sealed with Bona Prime Classic and Bona Traffic HD floor lacquer
Continue Reading →
A stunning parquet floor was installed using rustic 280mm solid oak blocks. These were fitted in a double herringbone pattern.
Sub-floor preparation was required involving the supply and installation both a plywood sub-floor and self levelling latex and DPM.
Also a floor fitted electric point was installed and covered with a removable lid to enable easy access.
The floor was then sanded to a fine finish and coated with one base coat and 2 top coats of Bona Mega ...
Continue Reading →
Existing oak floor restoration at the City of Birmingham Orchestra. The oak floor needed to be restored including a couple of repairs due to damage to existing oak flooring, the work was to include 2 studios. These needed to be completed first to allow for use later in the week, with the main hall to be completed last.
The main hall had some repairs to be undertaken to the oak floor before finally it could be sanded back to bare and ...
Continue Reading →
CMT Flooring fitted a Kahr’s Walnut Vermont and Oak Winchester engineered flooring into 3 rooms in a house in Harborne Birmingham. The floors
were laid over underlay and fitted underneath the skirting to give a beautiful and seamless look.