Sanding and sealing of existing wood floors. Filling of gaps between parquet blocks, strip flooring. Staining of floor boards followed by sealing with top quality water based floor lacquer from Bona or Junckers. Floor sanding in Birmingham, West Midlands
We were asked to sand and reseal an existing herringbone pattern parquet block floor in Ludlow, Shropshire that was in need of some care and attention.
We sanded the floor to remove the old floor coating that had change colour over the years and had hidden the beautiful oak parquet floor underneath
Once we had sanded the wooden floor and removed all the old coating we then applied one base coat of Bona Prime Classic followed by the top coats of Bona ...
Continue Reading →
18
MAR
2016
Share
We were asked to sand an existing wood floor in Sutton Coldfield, West Midlands.
The floor was sanded to a fine finish then we applied one base coat of Bona Prime Classic followed by
two top coats of Bona Mega floor lacquer to give the floor a beautiful and strong finish
Continue Reading →
15
MAR
2016
Share
A new maple wood strip floor was installed at our clients request in their front room in Birmingham.
The new wood strip floor was installed over a new plywood sub-floor by way of secret nailing.
It was sanded and resealed with Bona Mega floor lacquer
Continue Reading →
14
MAR
2016
Share
We were asked to sand and seal wood flooring in Kings Heath Birmingham. The wood floor was a lovely pine that needed sanding to a fine finish with 1 base coat of Bona Prime Classic and 2 top coats of Bona Mega Silk Matt applied to give a beautiful finish.
Continue Reading →
11
MAR
2016
Share
A Boen 14mm Oak Animoso with a White Live Natural Oil finish was chosen to be installed at the new museum in Wordsley, Stourbridge.
The existing sub-floor had an epoxy DPM applied (Bona R410), which was allowed to fully dry prior to the Boen engineered strip flooring being installed. The floor requires a finishing coat of White Live Natural Oil applied as a finishing coat prior to the museum opening, which will be in the very near future
Continue Reading →
10
MAR
2016
Share
Restoration and repair to a water damaged mosaic finger panel floor in Ambergate, Derbyshire. the existing finger panel floor had suffered from water damage and the individual finger blocks had come loose under the carpet tiles installed over them in the office.
The carpet tiles were taken up and the individual mosaic finger blocks taken up in the affected areas and put to one side. The sub-floor was then cleaned of all debris and then each mosaic finger block was reinstalled ...
Continue Reading →
9
MAR
2016
Share
We were asked to fully sand and reseal a wood flooring in a stunning property in Hampton Lovett, Droitwich, Worcestershire to bring it back to looking its best . The floor was sanded to bare wood and then sanded to a fine finish. The floor then had a base coat of Bona Prime Classic applied followed by 3 top coats of Bona Traffic HD to give a beautiful and long lasting finish
Continue Reading →
26
FEB
2016
Share
A solid wood floor was required to be installed at Birmingham University. The flooring that was chosen was a 90mm solid oak pre-finished board and this was installed over the existing wood floor.
Additional work was required to inlay the floor boxes and make a border for around the inset fireplace and hearth. Additionally a scotia bead was installed around the perimeter of the floor over the expansion gap and we custom made door ramps to allow for the difference in ...
Continue Reading →
22
SEP
2015
Share
The existing floor was removed and an epoxy damp proof membrane was then applied prior to the parquet flooring being installed. The blocks were then installed using a laser guide to ensure the straightness of the installation. Once the flooring was installed along with a two block border, the floor was then sanded and finished with one base coat of Bona Prime Classic and two top coats of Bona Mega water based floor lacquer.
Continue Reading →
18
MAY
2015
Share
Herringbone Floor Restoration Eaton Square, London
The floor required a number of repairs to the existing herringbone floor due to loose blocks and damage caused during the ongoing modernisation works taking place. The loose blocks were carefully lifted out and the floor beneath them checked to remove any loose debris or previous adhesive before they were then re-fixed back into place using Bona adhesive. The floor was then fully sanded to remove the previous finish
Fiddes Shellac Sealer was applied to the parquet ...
Continue Reading →
17
MAY
2015
Share