Supply and installation or installation of client supplied parquet flooring. Solid wood or engineered parquet flooring installed in Birmingham and the West Midlands.
Solid wood parquet can be new or reclaimed and once installed sanded and sealed with a waterbased floor lacquer, oil or wax finish
230mm x 70mm x 22mm Solid Oak Parquet Flooring was installed at Arley House near Bewdley. The existing sub-floors required additional preparation work, which included self-levelling latex and an epoxy DPM.
The solid oak parquet was installed in herringbone pattern and then sanded and sealed with Bona Prime Classic and Bona Traffic HD floor lacquer
Continue Reading →
A stunning parquet floor was installed using rustic 280mm solid oak blocks. These were fitted in a double herringbone pattern.
Sub-floor preparation was required involving the supply and installation both a plywood sub-floor and self levelling latex and DPM.
Also a floor fitted electric point was installed and covered with a removable lid to enable easy access.
The floor was then sanded to a fine finish and coated with one base coat and 2 top coats of Bona Mega ...
Continue Reading →
Brother Patrick asked us to install Basketweave Parquet flooring at The Oratory of St Philip Neri in Edgbaston, Birmingham. The existing sub-floor was covered with plywood to ensure it was level. 280 x 70 x 22mm solid oak parquet from Brooks Bros Ltd were installed using a silane adhesive directly to the ply-wood sub-floor. The parquet flooring was then sanded and resealed using Bona Classic Prime and Bona Traffic HD lacquer
Continue Reading →
Father Michael asked us to repair the existing parquet block floor at St John’s Church in Tmworth as alterations were being made and the floor needed to be extended where wwalls were being moved and replaced. Reclaimed blocks were sourced by Father Michael to match the existing blocks.
We needed to do a lot of floor preparation work before the blocks could be installed due to the unevenness of the existing floor along holes or damaged areas within the floor. Once ...
Continue Reading →
CMT Flooring were asked to install new solid oak parquet flooring. The solid oak parquet flooring was fully bonded to the existing screed subfloor using a silane flexible adhesive. The wood flooring was then sanded and then sealed with Bona Mega floor lacquer.
Continue Reading →
Church Hall Parquet Flooring
We were contacted by St Paul’s Church, Great Barr to take up an existing water damaged wood floor and install a new replacement solid oak parquet block floor.
The original Iroko parquet block floor was removed and the existing floor had a self levelling latex and an epoxy dpm installed.
We then installed new prime grade oak parquet block flooring to the whole floor area and sanded and resealed the floor using a base coat of Bona Prime Classic followed by ...
Continue Reading →
We were asked to supply and install a prime grade solid oak parquet herringbone floor to a hallway in Edgbaston, Birmingham.
The existing flooring was removed and we needed to install a layer of self levelling latex and an epoxy dpm before the blocks could be installed.
The prime grade solid oak parquet blocks had been acclimatising for 14 days prior to the installation close to where they were to be installed.
Once the oak parquet had been installed, the 1 ...
Continue Reading →
We installed a customer supplied engineered oak parquet floor (the parquet blocks have a tumbled look) to an extension to their property in Leamington Spa. Most of the floor was installed over a dpm covered screed floor, although some was installed over a plywood floor installed by the client
A two block border was installed to the perimeter of the rooms and it has a natural oil finish
Continue Reading →
A lovely herringbone parquet floor in Solihull needed some restoration to bring it back to looking its best. Loose blocks were uplifted and the concrete floor underneath cleaned of any debris and previous bitumen used to fit the blocks originally.
The wooden parquet blocks were then re-installed using Bona R848 silane adhesive to give an extremely strong yet flexible hold to the sub-floor. The floor was then sanded to a fine finish and then was sealed using Bona Prime Classic and ...
Continue Reading →
A new parquet floor was required by Chivenor School in Castle Vale, Birmingham.
The existing floor was taken up, the existing screed sub-floor had a Bona R410 DPM applied and allowed to fully dry. We then installed an oak 230 x 70mm parquet floor with a 2 block border to the hall.
This was then sanded to a fine finish using 40-120 grit continuous sanding belts. Once the floor had been fully sanded we applied 1 coat of Bona Prime and 3 ...
Continue Reading →