Oak Floor Sanding & Resealing – Lichfield, Staffordshire

Oak floor sanding & resealing in Lichfield, Staffordshire.

An existing oak parquet floor was in need of a sand and reseal to bring the floor back to looking almost as good as new.  The floor was sanded to remove the existing surface finish, we then applied a medium oak wood stain to the floor.  Once the medium oak wood stain was dry, the floor was finished using Bona Prime and 2 coats of Bona Mega floor lacquer

Continue Reading →
0

Oak Parquet Flooring – Arley House

Solid Oak Parquet flooring, installed at Arley House, nr Bewdley

230mm x 70mm x 22mm Solid Oak Parquet Flooring was installed at Arley House near Bewdley. The existing sub-floors required additional preparation work, which included self-levelling latex and an epoxy DPM.
The solid oak parquet was installed in herringbone pattern and then sanded and sealed with Bona Prime Classic and Bona Traffic HD floor lacquer

 

Continue Reading →
0

Oak & Walnut Engineered Flooring, Harborne Birmingham

CMT Flooring fitted a Kahr’s Walnut Vermont and Oak Winchester engineered flooring into 3 rooms in a house in Harborne Birmingham. The floors
were laid over underlay and fitted underneath the skirting to give a beautiful and seamless look.

Continue Reading →
0

Parquet Block Flooring – Shrewsbury

230mm x 70mm x22mm Solid Oak Parquet Block Flooring

CMT Flooring were asked to install new solid oak parquet flooring.  The solid oak parquet flooring was fully bonded to the existing screed subfloor using a silane flexible adhesive.  The wood flooring was then sanded and then sealed with Bona Mega floor lacquer.

Continue Reading →
0

Floor Sanding & Sealing, Lichfield Staffordshire

Wood Floor Sanding

The existing floor boards were sanded back to bare wood to remove the old surface finish, they then where sanded to a fine finish before a coat of Bona Prime Classic and 2 coats of Bona Mega floor lacquer were applied giving a beautiful clean look to the floors

Continue Reading →
0

Repair to strip flooring, Hopwas Staffordshire

We were asked to restore an original redwood strip floor that has been uncovered when the existing carpet was removed.

The existing fire hearth was still visible, se we had to firstly remove that and apply a self levelling latex to ensure a level area.  Existing redwood strip flooring was then removed from areas around the perimeter of the room and refitted into the previous fire hearth.

New strip flooring was then refitted to the perimeter of the room and stained to ...

Continue Reading →
0

Restoration of wood parquet herringbone floor Solihull Birmingham

A lovely herringbone parquet floor in Solihull needed some restoration to bring it back to looking its best.  Loose blocks were uplifted and the concrete floor underneath cleaned of any debris and previous bitumen used to fit the blocks originally.

The wooden parquet blocks were then re-installed using Bona R848 silane adhesive to give an extremely strong yet flexible hold to the sub-floor.  The floor was then sanded to a fine finish and then was sealed using Bona Prime Classic and ...

Continue Reading →
0

Wood Floor Sanding Ludlow Shropshire

We were asked to sand and reseal an existing herringbone pattern parquet block floor in Ludlow, Shropshire that was in need of some care and attention.

We sanded the floor to remove the old floor coating that had change colour over the years and had hidden the beautiful oak parquet floor underneath

Once we had sanded the wooden floor and removed all the old coating we then applied one base coat of Bona Prime Classic followed by the top coats of Bona ...

Continue Reading →
0
Page 1 of 2 12