Case Studies

Lapworth Museum, University of Birmingham

The existing floor at Lapworth Museum, University of Birmingham required restoration along with a full sand and reseal.  There were existing areas of block flooring to re-fix, allow for new floor boxes to be fitted along with gaps to be filled between the blocks.  The floor was then sanded back to the bare wood and sealed with one base coat of Junckers primer and 3 top coats of Junckers HP Commercial water based floor lacquer

Continue Reading →
0

Parquet Floor Installation – Great Barr, Birmingham

The existing floor was removed and an epoxy damp proof membrane was then applied prior to the parquet flooring being installed.  The blocks were then installed using a laser guide to ensure the straightness of the installation.  Once the flooring was installed along with a two block border, the floor was then sanded and finished with one base coat of Bona Prime Classic and two top coats of Bona Mega water based floor lacquer.
 
Continue Reading →
0

Eaton Square, London

Herringbone Floor Restoration Eaton Square, London

The floor required a number of repairs to the existing herringbone floor due to loose blocks and damage caused during the ongoing modernisation works taking place.  The loose blocks were carefully lifted out and the floor beneath them checked to remove any loose debris or previous adhesive before they were then re-fixed back into place using Bona adhesive.  The floor was then fully sanded to remove the previous finish

Fiddes Shellac Sealer was applied to the parquet ...

Continue Reading →
0

School Floor Sanding – Restoration of parquet flooring, Edgbaston

School Floor Sanding, Edgbaston

Sand and reseal of existing parquet herringbone block flooring at a school in Edgbaston.  The existing floor was sanded back to bear wood to remove the existing finish. It was then sanded to a fine finish before it was sealed with 1 base coat of Bona Prime Classic and 3 coats of Bona Traffic HD floor lacquer.

 

Page 4 of 4 1234