14mm Engineered Boen Floor, Wordsley, Stourbridge

A Boen 14mm Oak Animoso with a White Live Natural Oil finish was chosen to be installed at the new museum in Wordsley, Stourbridge.

The existing sub-floor had an epoxy DPM applied (Bona R410), which was allowed to fully dry prior to the Boen engineered strip flooring being installed. The floor requires a finishing coat of White Live Natural Oil applied as a finishing coat prior to the museum opening, which will be in the very near future

 

 

Continue Reading →
0

Mosaic Finger Block Floor Repair – Ambergate, Derbyshire

Restoration and repair to a water damaged mosaic finger panel floor in Ambergate, Derbyshire.  the existing finger panel floor had suffered from water damage and the individual finger blocks had come loose under the carpet tiles installed over them in the office.

The carpet tiles were taken up and the individual mosaic finger blocks taken up in the affected areas and put to one side.  The sub-floor was then cleaned of all debris and then each mosaic finger block was reinstalled ...

Continue Reading →
0

School Parquet Floor Installation – Chivenor School, Castle Vale

A new parquet floor was required by Chivenor School in Castle Vale, Birmingham.

The existing floor was taken up, the existing screed sub-floor had a Bona R410 DPM applied and allowed to fully dry.  We then installed an oak 230 x 70mm parquet floor with a 2 block border to the hall.

This was then sanded to a fine finish using 40-120 grit continuous sanding belts.  Once the floor had been fully sanded we applied 1 coat of Bona Prime and 3 ...

Continue Reading →
0

Restoration of existing wood flooring – Hampton Lovett, Droitwich, Worcestershire

We were asked to fully sand and reseal a wood flooring in a stunning property in Hampton Lovett, Droitwich, Worcestershire to bring it back to looking its best .  The floor was sanded to bare wood and then sanded to a fine finish.  The floor then had a base coat of Bona Prime Classic applied followed by 3 top coats of Bona Traffic HD to give a beautiful and long lasting finish

Continue Reading →
0

Double Herringbone Parquet floor – Rowney Green, Worcestershire

Our client requested a double herringbone prime grade oak floor to be installed to the lounge.

The floor first had a Bona R410 epoxy DPM installed over the screed sub-floor.  The 230mm prime grade oak parquet blocks were then installed using Bona R848 adhesive, with the header line being installed first.  Once this was installed the rest of the 230mm parquet blocks where installed in a double herringbone pattern.

The borders were then cut and the border blocks were installed.  The floor ...

Continue Reading →
0

Birmingham University – 90mm Solid Oak Prefinished flooring

A solid wood floor was required to be installed at Birmingham University.  The flooring that was chosen was a 90mm solid oak pre-finished board and this was installed over the existing wood floor.

Additional work was required to inlay the floor boxes and make a border for around the inset fireplace and hearth.  Additionally a scotia bead was installed around the perimeter of the floor over the expansion gap and we custom made door ramps to allow for the difference in ...

Continue Reading →
0

Parquet floor, Burbage, Leicestershire

Our client requested 350mm prime grade oak parquet flooring for a number of downstairs rooms.  The blocks were installed to the existing concrete sub-floor flowing from room to room with no door bars or thresholds required. A 2 block border was installed around the perimeter of the rooms and the skirting was installed once the floor had been fully installed so it would hide the required expansion gap to leave a clean over all look

 

Continue Reading →
0

Lapworth Museum, University of Birmingham

The existing floor at Lapworth Museum, University of Birmingham required restoration along with a full sand and reseal.  There were existing areas of block flooring to re-fix, allow for new floor boxes to be fitted along with gaps to be filled between the blocks.  The floor was then sanded back to the bare wood and sealed with one base coat of Junckers primer and 3 top coats of Junckers HP Commercial water based floor lacquer

Continue Reading →
0

Parquet Floor Installation – Great Barr, Birmingham

The existing floor was removed and an epoxy damp proof membrane was then applied prior to the parquet flooring being installed.  The blocks were then installed using a laser guide to ensure the straightness of the installation.  Once the flooring was installed along with a two block border, the floor was then sanded and finished with one base coat of Bona Prime Classic and two top coats of Bona Mega water based floor lacquer.
 
Continue Reading →
0
Page 3 of 4 1234